Power Page
Fire Rescue Saws & Ventilation Chainsaws page shell from the EFES 32-page SEO architecture.
Truckman's Choice fire rescue saws
Emergency ventilation and structural demolition work demand cutting tools that can survive heat, smoke, dust, impact, and hurried starts. EFES builds Truckman's Choice saws in Lemoyne, Pennsylvania for municipal, industrial, military, and international fire departments that need dependable scene-ready equipment.
Founded in 2009 by municipal firefighters, EFES brings more than two decades of mechanical experience as an authorized Cutters Edge service center into every modified Husqvarna powerhead, carbide chain, rotary saw, and service recommendation.
2009
EFES founded by firefighters
20+ yrs
Cutters Edge service experience
2 yr
Commercial warranty on new saws
Buy individual parts
Select common service components directly from the saw image, then add the part to cart. EFES can confirm fitment for Truckman's Choice, Cutters Edge, Husqvarna, Jonsered, Redmax, and Tempest/Ventmaster equipment before fulfillment.
Fireground mission
Commercial saws are built for clean air and predictable work. Truckman's Choice modifications focus on starting, breathing, handling, and protecting the bar and chain in roof ventilation and forced-entry conditions.
01
A machined aluminum velocity stack and 4-stage external prewrap keep the engine breathing through drywall dust, wood fiber, soot, smoke, and heat while maintaining a stable fuel-air ratio.
Improves usable horsepower and reduces filter starvation.
02
Automatic compression release, an oversized D starter handle, and a momentary contact ON/OFF switch keep the ignition hot and reduce the chance of flooding during high-stress starts.
Built for gloved operators.
03
A wrap-around handle supports vertical, horizontal, and angled cutting on steep roof pitches while also acting as a physical chain catcher if the chain derails or breaks.
Safer control from awkward stances.
04
The optional aluminum guard covers the bar and chain and adjusts without tools so operators expose only the cut depth needed for decking without over-penetrating trusses or rafters.
12, 16, and 20 inch bars support 6, 8, and 10 inch max cut depths.
05
High-strength alloy bars use hand-ground, flame-hardened rails to resist rail splaying under heat, side load, and heavy structural cuts.
Designed for fire-service lateral loads.
Chainsaw lineup
The primary chainsaw portfolio is built from professional Husqvarna XP powerheads and modified by EFES into 372XP-TC, 572XP-TC, and 390XP-TC / 9000TC rescue saw configurations.
| Parameter | 372XP-TC | 572XP-TC | 390XP-TC / 9000TC |
|---|---|---|---|
| Engine | Single-cylinder 2-cycle Chrome Bore | Single-cylinder 2-cycle X-Torq | Single-cylinder 2-cycle Chrome Bore |
| Ignition | Max Logic modular electronic | AutoTune digital electronic | Max Logic modular electronic |
| Spark plug | NGK BPMR7A | NGK BPMR7A | NGK BPMR7A |
| Spark plug gap | 0.020 in / 0.5 mm | 0.020 in / 0.5 mm | 0.020 in / 0.5 mm |
| Max engine speed | 13,500 RPM no load | 13,500 RPM no load | 13,500 RPM no load |
| Configuration | Ventilation and demolition saw | Modern AutoTune rescue saw | Heavy-duty legacy 9000TC class |
Performance gain
A stock commercial 372XP platform produces roughly 5.3 hp. With the Truckman's Choice velocity stack and West Coast Filter system, the modified 372XP-TC output is documented at about 6.4 hp, a gain of roughly 20.8 percent. That extra usable power matters when the saw is loaded with roofing, nails, sheet metal, smoke, and heat.
01
External prewrap filtration delays clogging from soot, drywall dust, and roof debris.
02
The velocity stack smooths and accelerates intake airflow into the carburetor.
03
Cooler, more consistent running helps reduce stalling during long ventilation cuts.
Carbide-tipped chain
Truckman's Choice supports three primary carbide-tipped chain configurations for different combinations of roof decking, timber, sheet metal, and demolition work.
| Parameter | Roof ventilation | Demolition | Wood cutting | Primary use |
|---|---|---|---|---|
| Bullet raker | A | A | C- | Commercial roof decks, lightweight sheet metal, impact-heavy environments |
| Single raker | C | B | A | Heavy timber, clean residential roof decks, fast chip clearance |
| Dual raker | B | B+ | C | Mixed-material demolition and general structural entry |
Rotary rescue saws
The Truckman's Choice rotary rescue saw family includes 770RTC, 970RTC, and 1270RTC configurations with magnesium blade guards, protective skid plate bases, and momentary hot-start ignition switches.
| Parameter | 770RTC | 970RTC | 1270RTC |
|---|---|---|---|
| Engine base | Husqvarna K770 | Husqvarna K970 | Husqvarna K1270 |
| Blade diameter | 12 or 14 in | 14 or 16 in | 14 or 16 in |
| Carburetor compensation | SmartCarb | SmartCarb | SmartCarb |
| Air filtration | Active Air Filtration | Active Air Filtration | Active Air Filtration |
| Best fit | Lighter rescue work | Balanced department rotary saw | Heavy-duty cutting depth and power |
Maintenance guide
Fire department mechanics and operators should follow structured service, tuning, clearing, and break-in practices to prevent avoidable downtime.
01
Low-speed, high-speed, and idle screws control starting, full-load mixture, and throttle opening. If idle is too low the engine stalls; if too high the chain or blade can spin at idle and create a safety hazard.
02
Open the choke, engage wide-open throttle, pull the starter to purge fuel, inspect or dry the spark plug if needed, clear residual vapor with the plug removed, then restart with choke open.
03
Use fresh high-octane fuel mixed at 50:1 with quality petroleum-based two-cycle oil, warm the engine at idle, make brief three-quarter-throttle bursts, then let the first tank cycle out without cutting load.
04
Single raker carbide chain can be sharpened up to three times with specialized equipment. Bullet raker chain can be repaired and reconditioned by authorized service centers like EFES.
Parts and service network
EFES stocks OEM replacement parts for Truckman's Choice and legacy Cutters Edge saws, including 2000 and 2100 series chainsaws plus 760R and 970R rotary saws. The Lemoyne service team also supports Husqvarna, Jonsered, Redmax, and Tempest/Ventmaster models.
01
Custom modifications include velocity stack installs, toolless depth guards, compression relief, and carbide tip replacement.
02
Specialized chain services include carbide tip replacement, laser rail alignment, hardness restoration, sharpening, and reconditioning.
03
Common auxiliary equipment includes rotary blades, apparatus mounts, replacement multi-cut chains, upgrade kits, and ethanol-free premix fuel cases.
Technical FAQ
Answers for chiefs, mechanics, and purchasing officers.
Truckman's Choice saws are EFES custom-modified fire-rescue configurations developed from more than 20 years of Cutters Edge service experience and professional Husqvarna engine platforms.
Use clean high-octane unleaded gasoline at 89 octane or higher. Standard petroleum-based two-cycle oil should be mixed at 50:1 unless a synthetic lubricant manufacturer specifies otherwise.
The velocity stack and 4-stage prewrap improve intake pressure behavior and help prevent soot and particulate clogging, delivering more usable horsepower than a stock commercial configuration.
Yes. Single raker carbide chain can be sharpened up to three times with specialized equipment, and damaged bullet raker chain can be repaired and reconditioned through EFES service.
Every new Truckman's Choice chainsaw includes a comprehensive 2-year commercial warranty for demanding department use.
Departments can purchase directly through EFES in Lemoyne, Pennsylvania or coordinate through authorized dealers. For custom specifications, bids, or fleet pricing, call (800) 504-2044 or email info@truckmanschoice.com.
Fleet procurement
EFES can help compare powerheads, bar length, chain style, depth guard preference, rotary saw options, replacement parts, and ongoing service needs before purchase.